SAS_UTIL_HELP.HLB  —  SET  CONTROLLER
    Selects the default controller specified by the device name.

    This command is required before entering all SAS utility commands
    except SHOW CONTROLLER and SHOW VERSION.

    Format

      SET CONTROLLER  device_name

1  –  Parameters

 device_name

    The device name has the format ddcu,
    where:

    dd       is the device code.
    c        is the controller designation A through Z.
    u        is the unit number (0 through 9999).

    To display device names, enter the SAS command SHOW CONTROLLER.

2  –  Example

     SAS> SET CONTROLLER PKA0

     Selected Controller _PKA0: is a LSISAS10XX device.
     SAS>

      In this example, controller _PKA0: is selected as the default
      controller.
Close Help