HELPLIB.HLB  —  SET  NETWORK  Examples
    1.$ SET NETWORK DECnet -
      _$     /MANUFACTURER= "VMS Software, Inc." -
      _$     /NODE="GALENA" -
      _$     /ADDRESS="19.129" -
      _$     /NETWORK_TYPE="DNA V" -
      _$     /INTERFACE="net 0" -
      _$     /DATA="Router: No" -
      _$     /STATUS="mcr ncl show node 0 all" -
      _$     /CONNECTIONS="mcr ncl show node 0 session control port * all"-
      _$     /COUNTERS="mcr ncl show node 0 session control all counters"-
      _$     /START="@sys$startup:net$startup" -
      _$     /STOP="@sys$manager:net$shutdown"

      This command adds the network service DECnet-Plus (Phase V) to
      the database, with the specified characteristics.

    2.$ SET NETWORK "TCP/IP" /REGISTER -

      _$ /MANUFACTURER="Hewlett-Packard Company" -
      _$ /NODE="ipv6.ucx.mars.univers.com" -
      _$ /ADDRESS="16.20.207.92" -
      _$ /NETWORK_TYPE="TCP/IP" -
      _$ /STATUS="TCPIP SHOW SERVICE" -
      _$ /CONNECTIONS="TCPIP SHOW DEVICE" -
      _$ /PPPD_CALLOUT="TCPIP$PPPD_CALLOUT"

      This command creates a new TCP/IP network service, adds it
      to the database, and enables the PPPD utility by supplying a
      logical name that identifies the location of the shareable
      image.

    3.$ SET NETWORK DECnet -

      _$                /MANUFACTURER= "VMS Software, Inc." -
      _$                /NODE="EMARET" -
      _$                /ADDRESS="12.378" -
      _$                /NETWORK_TYPE="DNA IV" -
      _$                /INTERFACE="net 0" -
      _$                /STATUS="mcr ncp show exec characteristics" -
      _$                /CONNECTIONS="mcr ncp show known link" -
      _$                /COUNTERS="mcr ncp show exec count" -
      _$                /START="@sys$manager:startnet" -
      _$                /STOP="mcr ncp set executor state shut"

      This command adds the network service DECnet (Phase IV) to the
      database, with the specified characteristics.
Close Help