TCPIP$UCP_HELP.HLB  —  MOUNT  Parameters
 mount_point

    Required.

    Local device (and optional directory tree) on which to mount the
    remote NFS file system. Specify this mount point as one of the
    following:

    DNFSn:
    DNFSn:[dir.subdir]
    DNFSn:[dir.subdir]file

    where:

    n        Specifies the unit number. Specify a value from 0 to
             9999. Specifying 0 causes the client to choose the next
             available unit number. (It does not mount a device named
             DNFS0:.)

    [dir]    Specifies the directory to mount
    or       (up to eight subdirectories in addition to the [000000]
    [dir.subdir]ectory).

    file     Specifies the individual file to mount.

 volume_label

    Optional. Default: First 12 characters of the combined values
    of the /HOST and /PATH qualifiers. The default label is a
    combination of /HOST and /PATH with a dollar sign ($) separating
    the two.

    Specifies the Files-11 (ODS-2 or ODS-5) volume label to be
    associated with the remote path name.

    You can use this parameter to provide a unique volume label on
    a system where there is a label conflict. The client does the
    following:

    o  Accepts only the first 12 characters for all other entries.

    o  Applies volume_label only on the first mount of a particular
       disk.

    o  Ignores volume_label with subsequent mounts on that disk.

    HP recommends that if you use the SET FILE /STATISTICS command
    on a file mounted with DNFS, do not include any colons (:) in the
    volume_label.

 logical_name

    Optional. Default: None.

    Specifies the logical name associated with the volume.

    The client creates the following logical definitions, depending
    on what you specify:

    o  If you mount DNFSn:[000000], the client defines the logical
       name as DNFSn:

    o  If you mount DNFSn:[dir.dir], the client defines the logical
       name as DNFSn:[dir.dir.] The extra dot allows for relative
       directory specifications. If you issue the following command:

       $ SET DEFAULT logical:[subdir]

       The full default definition becomes:

       DNFSn:[dir.dir.subdir]

    The client places the logical name in the SYSTEM logical name
    table, unless you specify the /GROUP or /SHARE qualifier. The
    client deletes the logical name from the SYSTEM table when you
    dismount the volume. The process must have SYSNAM privilege to
    mount a system mount point. Without SYSNAM or GRPNAM privilege,
    the user must specify /SHARE for a JOB mount. (See the /SHARE
    qualifier for more information.)
Close Help