SAS_UTIL_HELP.HLB  —  SHOW  EXPANDER
    Displays information about the SAS expander connected to the SAS
    Controller.

    Format

      SHOW EXPANDER  [exp_id]

1  –  Parameters

 exp_id

    Displays information about a specific SAS expander.

    If an expander ID is not specified, the SAS utility displays all
    available SAS expanders that the SAS Controller finds.

2  –  Qualifiers

2.1    /FULL

    Displays additional information about the expanders in the SAS
    domain.

3  –  Example

     SAS> SHOW EXPANDER

  Expander 1
          Physical Port   : 0
          SAS WWID        : 500508B3-00A1396F
          Dev Handle      : 9
          Num PHYs        : 13
          SAS Level       : 1
          Exp Flags       Device has configurable route table.
          Prog Link Rate  Max 3.0Gbps  Min 1.5Gbps
          HW Link Rate    Max 3.0Gbps  Min 1.5Gbps
          PHY Info        Table Routing  3.0Gbps speed
          Att Dev Info    SMP Target   LSI Device

      This example shows information about external SAS Expander 1,
      which is connected to the SAS Controller.
Close Help