MPDEV_REMOTE enables MSCP served paths to become members of a
    multipath set when set to ON (1). When set to OFF (0), only local
    paths to a SCSI or Fibre Channel device are used in the formation
    of additional multipath sets. However, setting this parameter to
    OFF does not have any effect on existing multipath sets that have
    remote paths.

    To use multipath failover to a served path, MPDEV_REMOTE must
    be enabled on all systems that have direct access to shared
    SCSI/Fibre Channel devices.

    If MPDEV_ENABLE is set to OFF (0), the setting of MPDEV_REMOTE
    has no effect because the addition of all new paths to multipath
    sets is disabled. The default is ON.