1.TCPIP> SHOW CONFIGURATION ENABLE SERVICE

      Enable service

       FTP, FTP_CLIENT, LPD, MOUNT, NFS, NFS_CLIENT, PCNFS,
        PORTMAPPER, REXEC, RSH, SMTP, SNMP

      Displays the services configured in the services database that
      will be enabled by the TCP/IP Services startup procedure.

    2.TCPIP> SHOW CONFIGURATION SNMP

      SNMP Configuration

      Flags:    AuthenTraps Sets

      Contact:  Sam Spade

      Location
        First:  Falcon Building
        Second: Los Angeles, California

      Community           Type       Address_list

      public              Read       0.0.0.0

      trapit              Read Trap  136.20.0.10

      trapit2             Read Trap  136.20.0.12, 136.20.0.15

      rw2                 Read Write 136.20.0.15, 136.20.0.100

      Displays the SNMP configuration.

    3.TCPIP> SHOW CONFIGURATION NAME_SERVICE
      BIND Resolver Configuration

        Transport:  UDP
        Domain:     fred.parrot.brd.com
        Retry:         4
        Timeout:       4
        Servers:    11.20.208.10, 11.20.208.53
        Path:       No values defined
      TCPIP>

      Displays, from the configuration database, the BIND resolver
      configuration.

    4.TCPIP> SHOW CONFIGURATION INTERFACE

      Displays the permanent definition of Internet interfaces DE1
      and LO0.

    5.TCPIP> SHOW CONFIGURATION SMTP

      This command is obsolete post the TCPIP version 5.7. It displays
      the SMTP configuration prior to version 5.7.

      Refer to the SMTP configuration file TCPIP$SMTP.CONF, for the
      configuration changes made post the version 5.7.