1  START


2  MAIL
   Manually starts the SMTP sender queues (not the receiver
   [server]).

   Related commands: SHOW MAIL, ENABLE SERVICE SMTP, SHOW
   CONFIGURATION SMTP

   Format

     START MAIL


3  Restrictions
   Requires SYSPRV or BYPASS privilege.

   SMTP consists of the sender and the receiver. Start the sender
   before you enable the receiver.

   Do not issue this command unless SMTP has been configured (with
   the SET CONFIGURATION SMTP command).


3  Examples

   1.TCPIP> START MAIL

     Starts the SMTP sender.

     (To start the SMTP sender when TCP/IP Services starts up, see
     the SET CONFIGURATION ENABLE_SERVICE command. To start the SMTP
     receiver, see the ENABLE SERVICE command.)


2  ROUTING
   Starts dynamic routing with ROUTED or GATED. If you want to
   change from one to the other, you must stop the current dynamic
   routing daemon then start the desired daemon. You cannot run both
   GATED and ROUTED at the same time.

   Related commands: STOP ROUTING, SET GATED

   Format

     START ROUTING  [/GATED ]

                    [ /LOG ]

                    [ /SUPPLY[=DEFAULT] ]


3  Qualifiers


/GATED

   Optional.

   Enables the gateway routing daemon (GATED).

   If you enable dynamic GATED routing, you will be able to
   configure this host to use any combination of the following
   routing protocols to exchange dynamic routing information with
   other hosts on the network:

   o  RIP (Routing Information Protocol), Versions 1 and 2

   o  RDISC (Router Discovery Protocol)

   o  OSPF (Open Shortest Path First)

   o  EGP (Exterior Gateway Protocol)

   o  BGP (Border Gateway Protocol), BGP-4

   o  Static routes


/SUPPLY

      /SUPPLY[=DEFAULT]

   Optional. Applies only to ROUTED. Do not use with /GATED.

   Broadcasts routing information to other hosts in 30-second
   intervals.

   If you specify /SUPPLY=DEFAULT, the local host supplies the
   default network route.


/LOG

   Optional. Applies to ROUTED. Do not use with /GATED.

   Logs routing activity to
   SYS$SYSDEVICE:[TCPIP$ROUTED]TCPIP$ROUTED.LOG.

   Default: No logging.


3  Examples

   1.TCPIP> START ROUTING /GATED

     Starts GATED dynamic routing on the running system.

   2.TCPIP> START ROUTING

     Interactively starts ROUTED dynamic routing on the running
     system.

   3.TCPIP> START ROUTING /SUPPLY

     Immediately starts ROUTED dynamic routing. The local host both
     broadcasts and receives network routing information.