SYNOPSIS

      ospfquery [adv|stats|errors|state|as|as-lsid|routing|interface|hops|neighbor]

1  –  FLAGS

    adv                <type[rtr|network|summary|boundary|external]>
                       <area id> <ls id> <adv rtr>: show link state advertisement
    stats              show cumulative log
    errors             show cumulative errors
    state              dump lsdb (except for ASEs)
    as                 dump ASEs
    as-lsid            dump ASEs with LSID's
    routing            print ospf routing table
    interface          show interfaces
    hops               show next hops
    neighbor           show neighbors

2  –  DESCRIPTION

    The ospfquery command is used to request ospf information stored
    at local ospf router.
    The ospfquery command is intended to be used as a tool for debugging
    ospf routing protocol, not for network management. SNMP is the
    preferred protocol for network management.