The following table summarizes the LANCP commands:
Command Function
@ (File specification) Reads and executes commands from the
specified file.
CLEAR DEVICE Deletes device data from the LAN
volatile device database.
CLEAR DLL or CLEAR MOPDLL Clears MOP downline load counters for all
nodes and devices.
CLEAR NODE Deletes a node from the LAN volatile node
database.
CONNECT NODE Connects to a remote node, such as a terminal
server, that implements a console interface
using the MOP console carrier protocol.
CONVERT DEVICE_DATABASE Converts the device database to the format
required by the current version of LANCP.
CONVERT NODE_DATABASE Converts the node database to the format
required by the current version of LANCP.
DEFINE DEVICE Enters a device into the LAN permanent
device database or modifies an existing
entry.
DEFINE NODE Enters a node into the LAN permanent
node database or modifies an existing
entry.
EXIT Stops LANCP, returning control to DCL.
HELP Provides help for the LANCP utility.
LIST BANDWIDTH Displays bandwidth settings in the LAN
permanent device database.
LIST DEVICE Displays information in the LAN permanent
device database.
LIST DLL or LIST MOPDLL Displays MOP downline load settings in the
LAN permanent device database.
LIST FAILOVER Displays LAN Failover settings in the LAN
permanent device database.
LIST NODE Displays information in the LAN permanent
node database.
LIST PTP (Future release, not currently supported)
Displays Precision Time Protocol (PTP) settings
in the LAN permanent device database.
LIST TRACE Displays LAN tracing settings in the LAN
permanent device database.
LIST TEST Displays LAN test settings in the LAN
permanent device database.
LIST ULAN (Future release, not currently supported)
Displays UDP LAN pseudo devices in the LAN
permanent device database.
LIST VLAN Displays VLAN LAN pseudo devices in the LAN
permanent device database.
PURGE DEVICE Deletes device data from the LAN permanent
device database.
PURGE NODE Deletes node data from the LAN permanent
node database.
SET ACP Modifies the operation of the LANACP LAN
Server process.
SET DEVICE Enters a device into the LAN volatile device
database or modifies an existing entry and
sets device parameters.
SET NODE Enters a node into the LAN volatile node
database or modifies an existing entry.
SHOW ACP Displays currently set LANCP and LANACP
options.
SHOW CONFIGURATION Displays a list of LAN devices on the
system.
SHOW DEVICE Displays LAN device information from the
LAN volatile device database and from the
requested LAN devices.
SHOW DLL or SHOW MOPDLL Displays the status of MOP downline load
services, state and counters.
SHOW LOG Displays the LAN$ACP.LOG file.
SHOW NODE Displays information in the LAN volatile
node database.
SHOW TEST Displays LAN device information from the
LAN volatile device database for current
test status.
SPAWN Creates a subprocess of the current process.
START DEVICE Starts a test on a LAN device.
TRIGGER NODE Issues a reboot request to a remote node.
UPDATE DEVICE Updates a device, specifically to issue
a reset request to the device driver.