1  CLEAR

2  DEVICE
   Deletes device data from the LAN volatile device database.

   Requires SYSPRV privilege.

   Format

     CLEAR DEVICE device-name

   If no qualifier is present to select the type of data to delete, the
   entire device entry is deleted.

3  Parameter

device-name

   Specifies the LAN device name. The device name has the form ddcu, where
   dd is the device identifier, c is the controller designation, and u is
   the unit number.

   LAN devices are specified as the name of the template device, which is
   unit 0. For example, the first EI Ethernet device is specified as EIA0,
   the second as EIB0, and so on. You can specify the first EI device, for
   example, as EIA, EIA0, or EIA0:.

   A partial device name, accompanied by the /ALL qualifier, selects all
   matching devices. For example: E to select all Ethernet devices, V for
   VLAN devices, EI for Ethernet EI devices, no device name to select
   all LAN devices.

3  Qualifier

/ALL

   Deletes requested data for all LAN devices in the LAN volatile device
   database. If you specify a device name, data is deleted for all matching
   devices; for example, EI/ALL deletes data for all EI LAN devices.

/BANDWIDTH

   Deletes device settings for bandwidth monitoring and disables the
   monitoring.

/CHARACTERISTICS

   /CHARACTERISTICS or /PARAMETERS

   Deletes device characteristics settings for the LAN device, such
   as speed, duplex mode, and other device parameters.

   For LAN Failover devices, clears failover settings. and disables the
   failover device.

/DLL

   /DLL or /MOPDLL

   Deletes MOP downline load settings for the LAN device.

/PTP

   (Future release, not currently supported)

   Deletes PTP settings for the LAN device.

/TEST

   Deletes test context for the LAN device.

/TRACE

   Deletes driver tracing settings for the LAN device.

3  Example
   LANCP> CLEAR DEVICE EIA0

   This command deletes device EIA0 from the LAN volatile device
   database.

2  DLL
   This command clears MOP downline load counters from the LAN
   volatile device and node databases for all nodes and devices.

   Requires SYSPRV privilege.

   Format

     CLEAR DLL

3  Parameters
   None.

3  Qualifiers
   None.

3  Example
   LANCP> CLEAR DLL

   This command clears MOP downline load counters from the LAN
   volatile device and node databases for all nodes and devices.

2  NODE
   Deletes a node from the LAN volatile node database.

   Requires SYSPRV privilege.

   Format

     CLEAR NODE node-name

3  Parameter

node-name

   Specifies the node name in the LAN volatile node database.

3  Qualifier

/ALL

   Deletes all LAN nodes in the LAN volatile node database. If
   you specify a node name, all matching nodes are deleted; for
   example, A/ALL deletes all nodes whose name begins with A.

3  Example
   LANCP> CLEAR NODE VMSSYS

   This command deletes the node VMSSYS from the LAN volatile node
   database.