1  –  DEVICE

    Deletes device data from the LAN volatile device database.

    Requires SYSPRV privilege.

    Format

      CLEAR DEVICE device-name

    If no qualifier is present to select the type of data to delete, the
    entire device entry is deleted.

1.1  –  Parameter

 device-name

    Specifies the LAN device name. The device name has the form ddcu, where
    dd is the device identifier, c is the controller designation, and u is
    the unit number.

    LAN devices are specified as the name of the template device, which is
    unit 0. For example, the first EI Ethernet device is specified as EIA0,
    the second as EIB0, and so on. You can specify the first EI device, for
    example, as EIA, EIA0, or EIA0:.

    A partial device name, accompanied by the /ALL qualifier, selects all
    matching devices. For example: E to select all Ethernet devices, V for
    VLAN devices, EI for Ethernet EI devices, no device name to select
    all LAN devices.

1.2  –  Qualifier

1.2.1    /ALL

    Deletes requested data for all LAN devices in the LAN volatile device
    database. If you specify a device name, data is deleted for all matching
    devices; for example, EI/ALL deletes data for all EI LAN devices.

1.2.2    /BANDWIDTH

    Deletes device settings for bandwidth monitoring and disables the
    monitoring.

1.2.3    /CHARACTERISTICS

    /CHARACTERISTICS or /PARAMETERS

    Deletes device characteristics settings for the LAN device, such
    as speed, duplex mode, and other device parameters.

    For LAN Failover devices, clears failover settings. and disables the
    failover device.

1.2.4    /DLL

    /DLL or /MOPDLL

    Deletes MOP downline load settings for the LAN device.

1.2.5    /PTP

    (Future release, not currently supported)

    Deletes PTP settings for the LAN device.

1.2.6    /TEST

    Deletes test context for the LAN device.

1.2.7    /TRACE

    Deletes driver tracing settings for the LAN device.

1.3  –  Example

    LANCP> CLEAR DEVICE EIA0

    This command deletes device EIA0 from the LAN volatile device
    database.

2  –  DLL

    This command clears MOP downline load counters from the LAN
    volatile device and node databases for all nodes and devices.

    Requires SYSPRV privilege.

    Format

      CLEAR DLL

2.1  –  Parameters

    None.

2.2  –  Qualifiers

    None.

2.3  –  Example

    LANCP> CLEAR DLL

    This command clears MOP downline load counters from the LAN
    volatile device and node databases for all nodes and devices.

3  –  NODE

    Deletes a node from the LAN volatile node database.

    Requires SYSPRV privilege.

    Format

      CLEAR NODE node-name

3.1  –  Parameter

 node-name

    Specifies the node name in the LAN volatile node database.

3.2  –  Qualifier

3.2.1    /ALL

    Deletes all LAN nodes in the LAN volatile node database. If
    you specify a node name, all matching nodes are deleted; for
    example, A/ALL deletes all nodes whose name begins with A.

3.3  –  Example

    LANCP> CLEAR NODE VMSSYS

    This command deletes the node VMSSYS from the LAN volatile node
    database.