Displays the current FTP parameter settings and, if you have an open connection, the name of the connected host and parameter settings relative to the connection. DCL Format SHOW STATUS STATUS UNIX Format status rstatus
1 – Examples
1.FTP> SHOW STATUS 211-FTP Server Status. 211-SITE set to +VMS+. 211-TYPE set to ASCII. 211-STRU set to FILE. 211-MODE set to STREAM. 211 Multiline responses are enabled. Connected to: HANKS.ABC.UCB.EDU VMS Plus mode enabled Mode = stream, Type = ascii, Form = non_print, Structure = file Error level is SUCCESS Passive is AUTO (IPv4: OFF, IPv6: ON) Displays the status of the connection with remote OpenVMS host HANKS. By default, FTP sets VMS Plus Mode for rapid file transfers between two OpenVMS systems running TCP/IP Services for OpenVMS. 2.FTP> status 211-FTP Server Status. 211-SITE set to +VMS+. 211-TYPE set to ASCII. 211-STRU set to FILE. 211-MODE set to STREAM. 211 Multiline responses are enabled. Local client's status: Connected to:HANKS.ABC.UCB.EDU VMS Plus mode enabled Mode = stream, Type = ascii, Form = non_print, Structure = file Error level is SUCCESS Passive is AUTO (IPv4: OFF, IPv6: ON) Reply display is on Parsing is on Prompting is off Port command is on Case: MPUT will preserve typographical case in destination filenames, if possible Is a superset of the SHOW STATUS command. The output is consistent with running the status command on other platforms. 3.FTP> show status 211-eagle.store1.equip.com FTP server status: Version 5.60 Connected to eagle.store1.equip.com Logged in as jones TYPE: Image; STRUcture: File; transfer MODE: Stream 211- No data connection 211 End of status Connected to: eagle VMS Plus mode disabled Mode = stream , Type = image, Form = non_print, Structure = file Error level is SUCCESS Passive is AUTO (IPv4: OFF, IPv6: ON) Displays the current FTP parameters, which control data transfers with the connected UNIX host eagle.