1 LANCP> SET DEVICE/MEDIA=TWI EWB0

    Sets the media type to twisted pair for EWB0.

    2 LANCP> SET DEVICE EIA0/DLL=ENABLE

    Enables MOP downline load service for EIA0, leaving the remaining
    MOPDLL parameters unchanged.

    3 LANCP> SET DEVICE EIA0/DLL=(ENABLE,EXCLUSIVE,SIZE=1482)

    Enables MOP downline load service for EIA0, in exclusivemode with data
    transfer size 1482 bytes, leaving the remaining MOPDLL parameters
    unchanged.

    4 LANCP> SET DEVICE EIA0/DLL=(ENABLE,NOEXCLUSIVE)

    This command enables LANACP MOP downline load service for EIA0 in
    nonexclusive mode.